Criteria for Preventive Maintenance with meters

Criteria for Preventive Maintenance with meters

When you create a preventive maintenance with meters and the configured meter in the maintenance plan has meter readings, when you approve the preventive maintenance and generate the events the commutative meter reading in the event starts at the higher value than the current meter reading. In other words, in preventive maintenance with a meter, events generated between the initial value of the plan and the current value of the meter are discarded.

    • Related Articles

    • Calculating Preventive Maintenance events with counters and Opening or Closure scheduling criteria

      The cumulative reading value of a preventive maintenance event becomes the same as the last counter reading when: the Work Order has an associated preventive event; the event is the last one with an associated Work Order (most recent); the preventive ...

    • How to create a preventive maintenance?

      Preventive maintenance specifies a set of maintenance actions to be performed based on a fixed recurrence or on meter values. To create a new preventive maintenance, select the option Work | Preventive Maintenances: The list of preventive ...

    • How to set the preventive maintenance plan replacement?

      On the maintenance plans of a preventive maintenance, it is possible to select the replacement criteria. The replacement criteria can be the following: None main (Multiplier) Replacement The plan replacement rules are the following: All maintenance ...

    • How to plan the preventive maintenance for several years?

      The events are not all generated when the preventive maintenance is approved. The events are rescheduled daily according to a set of rules. The following rules: Events based on the recurrence:  If the preventive has a daily plan, a maximum of 2 years ...

    • How does preventive maintenance rescheduling work?

      The preventive maintenance events recalculation is a daily process that recalculates all preventive maintenance events. This recalculation can be done automatically or as requested by the user. To automatically make it available, you must select the ...